催化裂化废水萃取脱酚预处理研究

选用焦化粗柴油为萃取剂,对催化裂化含酚废水进行脱酚预处理,结果表明,最佳萃取条件为：ｐＨ７．０－８．５,温度１５－４０℃,油水体系比１．７－２．１,理论萃取级数４－７级。在上述条件下,出水酚质量浓度为５０ｍｇ／Ｌ。萃取后的粗柴油用于炼油厂加氢精制装置。     

Energy consumption estimation model for dual-motor electric vehicles based on multiple linear regression

ABSTRACT

The drive range of electric vehicle (EV) is one of the major limitations that impedes its universalism. A great deal of research has been devoted to drive range improvement of EV, an accurate and efficiency energy consumption estimation plays a crucial role in these researches. However, the majority of EV’s energy consumption estimation models are based on single motor EV, these models are not suitable for dual-motor EVs, which are composed of more complex transmission mechanisms and multiple operating modes. Thus, an energy consumption estimation model for dual-motor EV is proposed to estimate battery power. This article focuses on studying the operating modes and system efficiency in each operating mode. The limitation of working area of each mode ensures the vehicle dynamic performance, then PSO algorithm is adopted to optimize the torque (speed) distribution between two motors to improve the system efficiency in the coupled driving mode. Finally, the energy consumption estimation model is established by multiple linear regression (MLR). The result shows that the proposed model has a high precision in energy consumption estimation of dual-motor EV.     

Risk-based optimal operation of hybrid power system using multiobjective optimization

ABSTRACT

This paper solves an optimal generation scheduling problem of hybrid power system considering the risk factor due to uncertain/intermittent nature of renewable energy resources (RERs) and electric vehicles (EVs). The hybrid power system considered in this work includes thermal generating units, RERs such as wind and solar photovoltaic (PV) units, battery energy storage systems (BESSs) and electric vehicles (EVs). Here, the two objective functions are formulated, i.e., minimization of operating cost and system risk, to develop an optimum scheduling strategy of hybrid power system. The objective of proposed approach is to minimize operating cost and system risk levels simultaneously. The operating cost minimization objective consists of costs due to thermal generators, wind farms, solar PV units, EVs, BESSs, and adjustment cost due to uncertainties in RERs and EVs. In this work, Conditional Value at Risk (CVaR) is considered as the risk index, and it is used to quantify the risk due to intermittent nature of RERs and EVs. The main contribution of this paper lies in its ability to determine the optimal generation schedules by optimizing operating cost and risk. These two objectives are solved by using a multiobjective-based nondominated sorting genetic algorithm-II (NSGA-II) algorithm, and it is used to develop a Pareto optimal front. A best-compromised solution is obtained by using fuzzy min-max approach. The proposed approach has been implemented on modified IEEE 30 bus and practical Indian 75 bus test systems. The obtained results show the best-compromised solution between operating cost and system risk level, and the suitability of CVaR for the management of risk associated with the uncertainties due to RERs and EVs.     

Effectiveness of primary enforcement safety belt laws and enhanced enforcement of safety belt laws: a summary of the Guide to Community Preventive Services systematic reviews

BACKGROUND: The use of safety belts is the single most effective means of reducing fatal and nonfatal injuries in motor-vehicle crashes. This paper summarizes the systematic reviews of two interventions to increase safety belt use: primary enforcement safety belt laws and enhanced enforcement of safety belt laws. The reviews were previously published in the American Journal of Preventive Medicine. METHODS: We conducted the systematic reviews using the methodology developed for the Guide to Community Preventive Services. RESULTS: These reviews provide strong evidence that primary laws are more effective than secondary laws in increasing safety belt use and decreasing fatalities and that enhanced enforcement is effective in increasing safety belt use. Increases in belt use are generally highest in states with low baseline rates of belt use. DISCUSSION: Primary safety belt laws and enhanced enforcement programs tend to result in greater increases in usage rates for target groups with lower baseline rates. Concerns regarding public opposition to these interventions may impede their implementation in some jurisdictions. However, surveys indicate that a substantial majority of the public supports implementation of both primary laws and enhanced enforcement programs. CONCLUSION: Based on the strong evidence for effectiveness of primary safety belt laws and enhanced enforcement programs, the Task Force on Community Preventive Services recommended that all states enact primary safety belt laws and that communities implement enhanced enforcement programs.     

The connecticut indirect source review: A methodology and model for evaluating CO concentrations

The body of information presented in this paper is directed to air pollution engineers who are concerned with the effect of indirect sources on ambient concentrations of carbon monoxide (CO). Data taken under controlled conditions are used to empirically derive and calibrate a model for predicting CO concentrations in the vicinity of roadway intersections and other points of possible vehicular congestion. Since the predicted free flow CO contribution of vehicles traveling at normal road speeds is relatively low, it is concluded that idling vehicles at points of congestion are the major cause of CO violations, and that state and federal programs should place more emphasis on relieving congestion and reducing idling emission rates in new vehicles.     

生物通风技术修复柴油污染土壤的土柱模拟实验

生物通风技术是将土壤气相抽提和生物降解结合起来的原位强迫氧化降解方法,对于修复因地下储油罐泄漏引起的土壤污染具有广阔的应用前景。通过室内土柱模拟柴油泄漏污染土壤,分析了不同历时残余总石油烃(total pe-troleum hydrocarbon,TPH)的平衡分布规律以及土壤中不同深度柴油量、总柴油量的变化。结果表明:(1)各柱残余TPH剖面分布差异的原因受土柱的初始装填情况的影响较大;(2)残余TPH平衡分布曲线呈双峰型的土柱,柴油的去除主要以挥发作用及生物降解作用为主;(3)挥发作用主要是由通风孔隙体积数及土壤含水率来影响的;重力作用则主要是由初始油浓度、土壤含水率、C∶N∶P影响的;除通风方式外,其余4个因素都对生物降解作用有影响;(4)初始油浓度较大,土壤含水率较小的柱8和柱11,生物降解作用最明显,柴油去除效果最好。该成果可为生物通风过程的强化提供理论依据。     

克拉玛依市机动车污染现状调查与防治对策研究

在调查克拉玛依市机动车尾气污染的基础上,分析存在的问题,并针对性地提出城市交通污染的控制对策.     

利用餐饮业废油脂制造生物柴油

世界的石油产量将会逐渐减少，石化柴油燃烧后所排放的废气是造成的城市空气污染的主要原因，生物柴油是石化柴油很好的替代能源，文章介绍了国外废油脂处理利用和甸餐饮业废油脂的概况，提出了利用餐饮业废油脂制造生物柴油的方法和工艺流程，并讨论了利用餐饮业废油脂制造生物柴油的几个问题。     

利用IVE模型建立成都市轻型汽油客车排放清单

城市机动车污染物排放清单的建立是控制机动车污染的关键.本研究以2012年为基准年,通过对成都市轻型汽油客车技术水平分布、活动水平和保有量等数据的调查,将IVE模型本地化,计算了成都市2012年轻型汽油客车VOCs、PM、NOx、CO的排放清单,并分析了清单的不确定性.结果表明:成都市2012年轻型汽油客车排放的VOCs、PM、NOx和CO分别为2.23×104t、1.6×102t、1.26×104t和2.03×105t;轻型汽油客车中黄标车VOCs、PM、NOx、CO的排放量分别占排放总量的27.5%、18.1%、37.2%和42.5%,表明黄标车是轻型汽油客车污染物排放的主要来源;排放清单的不确定性主要来自于排放因子,VOCs、PM、NOx和CO清单的不确定性分别为-31.67%~32.35%、-54.75%~55.09%、-6.56%~6.76%和-12.22%~12.51%.     

面向2035的节能与新能源汽车全生命周期碳排放预测评价

发展节能与新能源汽车是降低交通运输行业碳排放的重要技术路径.为量化预测节能与新能源汽车的全生命周期碳排放,利用全生命周期评价方法,以汽车相关技术路线和政策为参考,选取燃油经济性、整车轻量化水平、电力结构碳排放因子和氢能碳排放因子为关键参数,构建传统燃油汽车(ICEV)、轻度混合动力汽车(MHEV)、重度混合动力汽车(HEV)、纯电动汽车(BEV)和燃料电池汽车(FCV)的数据清单并对其全生命周期碳排放进行量化预测评价,对电力结构碳排放因子和不同制氢方式碳排放因子进行了敏感性分析和讨论.结果发现,2022年ICEV、 MHEV、 HEV、 BEV和FCV的全生命周期碳排放量(以CO₂-eq计)分别为208.0、 195.5、 150.0、 113.5和205.0 g·km^-1.到2035年,BEV和FCV相比于ICEV具有较为显著的减碳效益,分别降低69.1%和49.3%.电力结构的碳排放因子对BEV的全生命周期碳排放的影响最显著.关于燃料电池汽车的不同制氢方式,短期应以工业副产氢提纯为主供应FCV氢能需求,长期以可再生能源电解水制氢和化石能源...